NEWS
DC Gear Motor(MM-SG12)
※ Outline Dimension
※ Standard Operating Condition
Specification
● Rated Voltage : 6.0V DC Constant
● Operating Voltage Range : 4.5 ~ 7.5V DC
● Rated Load : 640.0 g-cm
● Direction of Rotation : CCW
● Motor Position : All directions
● Movable Temperature Range : -20C ~ +60°C
● Storage Temperature : -25°C ~ +85°C
※ Measuring Conditions
Specification
● Motor Positions : To be held with shaft horizontally
● Power Source : Regulated DC power supply which assures unquestionable measurement
● Environmental Temperature and Humidity : +10°C ~ +35°C and 30% ~ 90% RH
If judgment is questionable, measurement is to be made in accordance with JIS standard
testing conditions (20°C ± 2°C ，65% ± 5% RH).
● Direction of Rotation : CCW when viewed from output shaft side.
※ Electrical Characteristics
Specification
● No-load Current : 55 mA MAX.
● No-load Speed : 70 ± 10% rpm
● Rated-load Current : 200mA MAX.
● Rated-load Speed : 55 ± 10% rpm
● Stall Torque : 2800g-cm (min.) based on measurement at two different load points.
(0 g-cm ＆ 500 g-cm)
● Starting Voltage : 1.5 V DC (max.) under no-load.
● Starting Current : 800 mA (max.) (all position of Rotor)
● Insulation Resistance : 1.0 Mohm (min.) between either terminal and housing at 100 V DC
for one minute.
● Electrical Noise : To be equipped with varistor, when happend doubt to this item we will be
confer with each other.
DC Gear Motor(MM-SG12) - Specification - Click here to download