MM-PG22 Gear Box Motor
MM-PG22 Gear Box Motor
※Outline Dimension
※ Standard Operating Condition
Specification
● Operating Voltage Range : 6~12VDC
● Rated Voltage : 9VDC
● Rated Load: 0.5Kgf-cm
● Operating Temperature Range: -10～＋60 ℃
● Storage Temperature Range: -30～＋85 ℃
● Test Position: Horizontal
※ Electrical Characteristics
Specification
● Maximum No-load Current: 0.15A
● No-load Speed: 401 ±40 rpm
● Rated-load Current: 0.48A
● Rated-load Speed: 340 ±34 rpm
● Min. Stall Torque: 2.2Kgf-cm
● Max. Stall Current: 3.5A
● Insulation Resist(500V): 20MΩ
● Dielectric Strength: 250AVC
● Motor Brush Type: Graphite
● Output Power at Max. Eff.: 1.9W
※Mechanical Characteristics
Specification
● Gear Type: Planetary
● Gear Ratio: 169/3249
● Gear Material: Mixed
● Rated Tolerance Torque: 1.5Kgf-cm
● Moment Tolerance Torque: 3Kgf-cm
● Max. Axial Load: 1.0Kgf
● Max. Radial Load: 1.5Kgf
● Max. Shaft Runout: 0.05mm
● Max. Shaft End Play: 0.20mm
● Bearing Type: Sleeve
● Net Weight: 82±5 grams
※Descriptions of the Controller Features
Note
● Red wire(+) of the controller is connected to +24 VDC,and black wire(-) to GND.
● Green wire is connected to +5 VDC,and black wire to GND.
● When the white wire is shut off,the motor runs at 4000rpm(the highest),CW
● The motor stops running when the white wire is connected to black one.
● When the yellow wire was connected to black one,the motor runs with CCW.
● The blue wire which can be detected by OSC means speed signal output.
| Red | 24 VDC |
| Black | Ground |
| Yellow | Connect to Black (CCW) |
| Green | 0~5 VDC (Speed Control) |
| Blue | FG |
| white | Connect to Black (Stop) |