MM-PG36 Gear Box Motor
MM-PG36 Gear Box Motor
※Outline Dimension
※ Standard Operating Condition
Specification
● Operating Voltage Range : 21~27VDC
● Rated Voltage : 24VDC
● Rated Load: 10.5Kgf-cm
● Operating Temperature Range: -10～＋60 ℃
● Storage Temperature Range: -30～＋85 ℃
● Test Position: Horizontal
※ Electrical Characteristics
Specification
● Maximum No-load Current: 0.19A
● No-load Speed: 71 ±7 rpm
● Rated-load Current: 0.6A
● Rated-load Speed: 60 ±6 rpm
● Min. Stall Torque: 65Kgf-cm
● Max. Stall Current: 3.5A
● Insulation Resist(500V): 20MΩ
● Dielectric Strength: 250AVC
● Motor Brush Type: Brushless
● Output Power at Max. Eff.: 6.5W
※Mechanical Characteristics
Specification
● Gear Type: Planetary
● Gear Ratio: 1/56
● Gear Material: Metal
● Rated Tolerance Torque: 20Kgf-cm
● Moment Tolerance Torque: 40Kgf-cm
● Max. Axial Load: 3.0Kgf
● Max. Radial Load: 8.0Kgf
● Max. Shaft Runout: 0.04mm
● Max. Shaft End Play: 0.30mm
● Bearing Type:Dual Ball
● Net Weight: 477±20 grams
※ Descriptions of the Controller Features
Note
● Red wire (+) of the controller is connected to +24 VDC,and black wire (-) to GND.
● Green wire is connected to +5VDC, and black wire to GND.
● When the white wire is shut off, the motor runs at 4000rpm (the highest), CW
● The motor stops running when the white wire is connected to black one.
● When the yellow wire was connected to black one, the motor runs with CCW.
● The blue wire which can be detected by OSC means speed signal output.
| Red | 24 VDC |
| Black | Ground |
| Yellow | Connect to Black (CCW) |
| Green | 0~5 VDC (Speed Control) |
| Blue | FG |
| White | Connect to Black (Stop) |
<<BACK